Range Extender expand the range of any standard wireless networks by repeating the signal from a wireless router and redistributing it in a new "extended" location.
Amped wireless SR10000 range extender setup – setup.ampedwireless.com login
- For amped wireless extender setup, you must first find a suitable Setup Location to install the Amped wireless SR10000 range extender.
- Note: It is important to select a suitable location for amped wireless range extender. The optimal Amped wireless range extender location should be more than the halfway between your amped wireless router Wi-Fi router and your Wi-Fi dead zone.
- Connect your computer or your networking device to the amped wireless range extender SR10000.
- Open your web browser on your device and log into the amped wireless range extender to connect it by typing amped wireless extender login web address http://setup.ampedwireless.com into the web address bar
- If you are unable to access the Amped wireless SR10000 range extender’s web menu, you must try to access it by typing in the amped wireless default IP address http://192.168.1.240 into your web address bar.
- Enter the amped wireless range extender login default settings for the username and password. The amped wireless range extender login/setup.ampedwireless.com username and amped wireless range extender login/setup.ampedwireless.com password are ‘admin’ and should be entered the same in both the setup.ampedwireless.com login fields.
- The Amped wireless SR10000 range extender Dashboard will appear providing you with the current status of the Range Extender. Setup.ampedwireless.com.
- Click on the given SCAN option to find an available network that has to be extended.
- Highlight and select the home Wi-Fi network that you want to extend using the Amped wireless SR10000 range extender.
Note: Check that your home Wi-Fi Network has a signal strength of 70% or greater to get a strong or more reliable connection. - Click on Next to continue.
- Connect to the required network by entering the password key if there has been security enabled on that particular home network that you want to extend using amped wireless range extender SR1000. Setup.ampedwireless.com
Note: The Amped wireless SR10000 range extender setup Wizard will automatically detect your home network’s security settings. - Configure the Network settings SSID and password for your amped wireless range extender’s extended network for amped wireless range extender setup using setup.ampedwireless.com.
- Click on Next to apply the settings made, following which the countdown will start, let it complete.
- During the countdown process, your amped wireless range extender SR1000 will reboot and disconnect the connected Wi-Fi connection.
- You will now have to reconnect your device to the amped wireless range extender SR1000 new Extended Network. Follow the displayed onscreen instructions on the screen to connect to the Extended Network by amped wireless range extender SR1000. Setup.ampedwireles.com
- After connecting to the amped wireless range extender SR1000’s extended network, click on the check box to confirm.
- Click on Next button to allow completion of the amped wireless range extender SR1000 setup process through setup.ampedwireless.com.