setup.ampedwireless.com - Amped AC1900 Router Setup

After you buy Amped Wireless AC1900 Wi-Fi Router (B1900RT), you need to install and set up the router to get connected to the wireless network through setup.ampedwireless.com login web address from the web browser of the connected device. To get started with installation and setup, you must check to ensure that you have all the contents within your package.

For the basic setup of the Amped Wireless AC1900 Wi-Fi Router (B1900RT), you must follow the steps in order:

Perform Amped Wireless AC1900 Wi-Fi Router (B1900RT) setup preparations.

Disconnect power supply from modem.

• Establish wired cable connections between the Amped Wireless AC1900 Wi-Fi Router (B1900RT) and the modem as well as computer. 
• Connect all devices to power and turn on modem, computer and your Amped Wireless AC1900 Wi-Fi Router (B1900RT).
• Access the amped wireless router setup wizard through setup.ampedwireless.com.
• Internet connection is detected and established
• You are welcomed to the Amped Wireless AC1900 Wi-Fi Router (B1900RT) dashboard.

After the Amped Wireless AC1900 Wi-Fi Router (B1900RT) has been setup successfully, you can then access your router’s dashboard directly following Amped wireless default login via setup.ampedwireless.com web address.

Now, follow the steps mentioned below precisely to perform setup and installation of Amped Wireless AC1900 Wi-Fi Router (B1900RT) via setup.ampedwireless.com login:

Amped Wireless AC1900 Wi-Fi Router (B1900RT) installation and setup via setup.ampedwireless.com login:

• Disconnect and turn off the previously connected router if you are using it and are about to replace with your Amped Wireless AC1900 Wi-Fi Router (B1900RT).
• Also disconnect your previous router from computer and the modem on home network.
• Power off and Disconnect the modem from receiving power supply from power source, also, remove the back battery if used for power by the modem.
• Connect your Amped Wireless AC1900 Wi-Fi Router (B1900RT) to the modem with the blue colored Ethernet cable which connects the modem at one end and the blue modem port on the Amped Wireless AC1900 Wi-Fi Router (B1900RT) at the other end.

• Power on your modem back by plugging its power adapter to the power source or else, reinserting the back battery if used by the modem.
• Attach the included antennas to the required antenna ports on the Amped Wireless AC1900 Wi-Fi Router (B1900RT).
• Connect the Amped Wireless RTA1750 Router to the computer with a grey Ethernet cable that connects to an available LAN port on your computer and one of the LAN ports on the Amped Wireless AC1900 Wi-Fi Router (B1900RT).

Note: You can also connect your computer to the Amped Wireless AC1900 Wi-Fi Router wirelessly/Wi-Fi Network using the default wireless settings mentioned on the router’s label.

• Connect the Amped Wireless AC1900 Wi-Fi Router (B1900RT) to the power by attaching the power adapter to power outlet.
• Turn on your Amped Wireless AC1900 Wi-Fi Router (B1900RT, modem and wired or wirelessly connected computer.

• Open your Web Browser on the computer to Access the amped wireless Setup Wizard for Amped Wireless AC1900 Wi-Fi Router (B1900RT) login.
• Enter Amped Wireless AC1900 Wi-Fi Router (B1900RT) - amped wireless router login web address http://setup.ampedwireless.com or the default amped wireless router login IP address http://192.168.3.1 into the address bar of the web browser.
• For the first time Amped Wireless AC1900 Wi-Fi Router (B1900RT) installation and setup, the amped wireless router’s Setup Wizard will automatically get loaded.
• If you wish to configure the router manually, choose to skip the amped wireless Setup Wizard.
• The amped setup Wizard automatically detects Amped Wireless AC1900 Wi-Fi Router (B1900RT) Internet settings.
• On detecting the router’s Internet connection, a green check mark is seen.
• Click Next to proceed ahead.
• Personalize your Amped Wireless AC1900 (B1900RT) Wi-Fi Router’s Wi-Fi Settings and change the default login values by assigning new wireless network name and wireless password for both of the router’s 5GHz Wi-Fi network band and 2.4GHz Wi-Fi network band.
• Create an admin Password to connect to your Amped Wireless AC1900 Wi-Fi Router’s wireless network for security.
• The Amped Wireless AC1900 Wi-Fi Router then reboots automatically taking about 1 minute to start again. 
• Following the Amped Wireless AC1900 Wi-Fi Router installation and setup, the Setup Summary page opens up with details of your Amped Wireless AC1900 Wi-Fi Router login and password.

If you have to enter the dashboard of Amped Wireless AC1900 Wi-Fi Router in future after setup is complete, you will reach the dashboard directly after logging in through setup.ampedwireless.com.